| ||||||||||||||||||
|
|
Operation of the ringing of the hoursAny typos are as a result of direct translation of the original French. Release:
This sector actuates a pinion of toothed rack adjusted on the basis of square of the rocket shaft (1), which makes it possible to arm the spring with the barrel of ringing. The toothed rack actuates in its rotation the feeler of the hours (7), which is limited in its advance by the snail of the hours (8) to 12 levels.
This cam is fixed on star of the hours at 12 teeth (9) positioned by a saltire and involved each hour. Under the pinion of toothed rack is adjusted and screwed the ratchet of the
hours (11). In the hammer of the hours (12) an axis and a stem (13) are screwed. The lifting of the hours (17) is adjusted freely on the axis of the hammer
and is pressed on the turntable. The hammer is maintained in its home position by the spring (16). This position determined exactly compared to the stamp is regulated by the counter-spring (19 in green) which is directional. The lifting (17) of the large hammer is actuated by the teeth of the ratchet
of the hours (11). The number of teeth passing in front of the lifting during release is determined by the advance of the feeler (7) limited by the snail of the hours (8).
|
|
www.vintagepocketwatches.net
© 2003, 2004, 2005. No portion of this website may be reproduced without the
expressed consent of the N.A.W.C.C.® Chapter 94 and its Board of Directors. For
questions concerning the site contact webmaster@vintagepocketwatches.net |