Gauge Rolex 3135

Any typos are as a result of direct translation of the original French.

Design features:

Stop watch
Automatic day of the month with fast corrector
Switch of second in the center with stop second
Annular beam with 2 pairs of regulating nuts Microstella and spiral Breguet
Shock absorber of beam and combined kittens of wheel of exhaust
Bridge of adjustable beam in height by two nuts

External diameter: 28.50 mm
Total height with automatic module of winder: 6.00 mm
A number of stones: 31
Frequency 4 Hz/28800 A/h

The movement without the automatic block

The automatic block in 3 phases:

1) the block in entirety

2) the block without the lower bridge of the device, we can see well the pinion of the wheels of inversion geared with the entraîneuse wheel of ratchet as well as the pinion of oscillating mass and the key which maintains the axis of the mass.

3) a wheel of dismounted inversion, one guesses with 5h wheel one of the pawls which involves or degrene according to the direction of the wheel

Another sight, one can see the adjusting nuts height of the bridge of beam, two screws Microstella (with 6h and 12h of the beam)

The beam is equipped with two pairs of nuts regulating out of gold Microstella.
A short pair
A long pair

1 key division Microstella on 2 short nuts = 1 s/j

1 key division Microstella on 2 long nuts = 2 s/j

Without the crane of wheel. One sees well the two nuts of setting height of the bridge.

Dimensioned dial, the disc of date was removed, one can see the rocker of cam with its spring (with 9h) as well as the wheel of day of the month

The disc with the finger of day of the month was removed and we can see the ruby which will go up on the cam of day of the month, until the moment or the finger fixed on the latter will drive out ahead the finger which, will make him pass the indicating disc of dates