Gauge ETA 2892 A2
Any typos are as a result of direct translation of the
original French.
Presentation:
Gauge 111/2' ''
Diameter of 25,60 mm
3,60 mm height
Mechanical movement with automatic system of reassembly
Indication of the day of the month
Stem of winder with 3 positions (reassembly, put at the fast
date, put per hour)
Alternances/heure of 28800
Angle of lifting of 51°
|
|
|
|
|
Dimensioned movement (without
the automatic block)
|
|
|
One can see the stop beam, which, to make
the function is in relation to the running pinion.
As soon as one draws the stem from winder to make the setting
per hour, the pinion running moves towards the center of the
part and thus involves the stop beam which will rock and come
to rest against the circumference of the beam.
|
|
|
The automatic block seen of lower part
|
|
|
Separate mass of the block. One sees the
auxiliary reverser on the top of the block.
|
|
|
The open block with left on the right:
The intermediate gear of reduction
The wheel of reduction
The wheel of inversion
The auxiliary reverser
The reverser
|
|
|
Detail of the bridge of barrel (below),
one can see of left on the right:
The wheel of crown
The intermediate wheel of crown
The intermediate ratchet
The entraineuse wheel of ratchet
In top, the pawl
Under the bridge, the plate of pawl
|
|
|
Detail of the anchor, coils exhaust.
|
|
|
The turned over beam
|
|
|
Dimensioned dial
|
|
|
The fast corrector in action, when one is
in the 2nd position of the stem and that one turns it to back
to make the setting at the fast date.
|
|
|
The finger of the corrector of day of the
month is in catch with the disc of day of the month to carry
out the change of it.
|
|
|
Large plan
|
|
| |
|
